TTG Maintenance Wash Plus Inside
The TTG Maintenance Wash Plus Inside package is the second tier of maintenance servicing. This package includes the exterior and interior of the vehicle, and plus some.
Using a separate bucket for wash, rinse and wheels ensures that dirt that is picked up off any surface is not dragged across your coating damaging it. The wash bucket has 2 Microfibre mitts, one for the top half of the car, and one for the lower half. The wheels bucket has the tools needed to restore your wheels to new.
- Snow Foam – Gtechniq W4 Citrus Foam
Unlike traditional pre-wash snow foams that come loaded with caustic chemicals, W4 Citrus Foam is a pH neutral formula that removes hard to shift grime without damaging coatings.
It combines an effective citrus degreaser, with a foaming agent, making it tough on road grime and bug splatter.
- Clean all Exterior Surfaces – Gtechniq G Wash
G Wash has been specifically formulated to work in harmony with the Gtechniq range of coatings.
One hundred percent biodegradable, G Wash produces a high foam content which breaks the bond between the dirt film and your vehicles paintwork. The shampoo lubricates dirt particles, minimising surface abrasion, maximising gloss retention.
- Remove any Surface Contaminants* – Gtechniq W7 Tar and Glue Remover* & Gtechniq W8 Bug Remover*
W7 Tar and Glue Remover is a full-strength, solvent-based tar and glue remover that is compatible with the Gtechniq coating range.
Tar spots are part of everyday driving and can be extremely difficult to remove without using a specialist product. Whether using W7 on a Gtechniq coated car, or one that is not protected, it will successfully remove contamination without tarnishing the finish.
W8 Bug Remover, Bug splatter is one of the hardest to remove contaminants. W8 Bug Remover is a 100% biodegradable, pH neutral formula. It makes light work of removing bug splatter without relying on aggressive caustic ingredients.
Unlike traditional bug removers, W8 will not affect the performance of any of Gtechniq’s coatings.
- Wheels, Wheel Arches & Callipers* – Gtechniq W6 Iron and General Fallout Remover*
W6 Iron and General Fallout Remover is formulated to offer you the safest, most effective method of removing potentially damaging contamination most commonly found on your vehicle’s paintwork and rims.
In addition to its exceptional fallout removal function, W6 has a corrosion inhibitor and additive designed to combat the effects of acid rain.
It is a thick gel-like formula that will cling to vertical surfaces, degreasing them.
- Hand (Microfibre Towels) and/or Air Assisted Drying (Blown Air)
- Application of Sio2 Coating Booster – Gtechniq C2 Liquid Crystal V3
Gtechniq C2 Version 3 (v3) Liquid Crystal will add gloss and protection to your paint in an easy-to-use spray on formula!
C2 v3 is a high gloss spray-on coating that will blanket your vehicle in a highly reflective, glass-like finish.
This coating is built around the same monomolecular (SI14) technology as the popular C1 Crystal Lacquer, so you know you are receiving great protection with this product!
Simply spray the surface with a thin coating and buff away with a clean microfiber towel and minimal effort! You can even apply C2 v3 to all exterior surfaces (i.e., paint, glass, chrome, plastic trim, etc.) to provide excellent UV protection, water-sheeting and dirt repellency.
- Glass Cleaned Inside & Out – Using Gtechniq G6 Perfect Glass
G6 Perfect Glass is a pure formula, focused on function. All ingredients that can cause smearing have been discarded, like fragrance and cheap solvents, to produce a high-performance, powerful cleaning product.
G6 creates a positive charge on the glass helping to repel dust.
- Wheels Dressed in a High-Quality Non-Silicone Dressing – Gtechniq T1 Tyre & Trim
T1 Tyre and Trim has been formulated to keep your tyres and trim black and spotless for longer. T1 gives you control over gloss levels, offering a natural satin finish with a single coat, and a high-gloss finish with multiple coats.
Using the latest nanotechnology, T1 offers previously unattainable levels of durability, water and oil repellency.
- Interior Blown Out & Vacuumed
We carefully blow out the interior to loosen debris before we vacuum to ensure we achieve the best clean, also taking the time to remove floor mats.
- Interior Surfaces Wiped Clean – Gtechniq I2 Tri-Clean
I2 Tri-Clean is an all-surface interior product that cleans and kills 99.9% of bacteria.
Developed in conjunction with the global leader in antibacterial and antimicrobial technology, Biocote®, I2 ensures surfaces remain hygienic and fresh, by actively reducing the number of microbes.
I2 also contains a true colour absorber, not an odour mask, that eliminates tacky residues that attract dirt.
- Dash and Other Trims Sealed with UV Protectant* – Gtechniq C6 Matte Dash*
C6 Matte Dash is specifically designed to protect dashboard and door card materials including vinyl, plastics and rubberised finishes.
The coating adds abrasion resistance and UV protection to treated surfaces. And with added Biocote® antimicrobial technology, treated surfaces kill 99.9% of bacteria.
C6 will not affect the gloss of your car’s trim and leaves a natural feel.
This product should not be used to protect suede, nubuck or any fibrous finishes.
- Leather Surfaces Sealed and Protected* – Gtechniq L1 Leather Guard*
L1 Leather Guard forms a durable abrasion resistant matte finish which offers the best ever protection against abrasion damage, UV rays, dye transfer and other discolouration.
With added BioCote® antimicrobial technology, treated surfaces will kill 99.9% of bacteria.
Friction protection is particularly important on seat bolsters, seat piping and any other high wear areas. The anti-stain function is most relevant for light coloured leathers which are typically stained by dark coloured fabrics such as indigo jeans.
Many leathers products market themselves on how they feed leather, when in fact this is not needed. Modern automotive leather use synthetic fat liquors which do not evaporate. Any product that is designed to feed leathers will not be absorbed by modern automotive leathers but instead remain on the surface attracting dirt which will then act as an abrasive foreshortening the leather’s finish.
- Final Inspection* denotes as required and not standard with every wash. (additional charges apply)